Products

Armour Grip Suspension Clamp For OPGW ADSS

Rich results on Google's SERP when searching for "Armour Grip Suspension Clamp OPGW"

Armour Grip Suspension Clamp is used to support OPGW and ADSS at the intermediate towers.

Usage scenarios

Communication system

Technical features

The helical structure distributes the stress evenly.

Product advantages

Its structure is simple, installation is convenient, there is no need for special tools, and is maintenance-free;
It has a good dynamic stress-bearing capacity and can provide sufficient grip strength of not less than 14% RTS to protect the safe operation of OPGW under unbalanced load;
It has a large contact area, uniform stress distribution, and there is no stress concentration point, which has a good protective effect on OPGW.

Technical details

Catalog No.	Suitable diameter of OPGW (mm)	RTS of OPGW (kN)	Dimensions (mm)					Vertical Failure load (kN)
Catalog No.	Suitable diameter of OPGW (mm)	RTS of OPGW (kN)	L1	L2	M	C	A	Vertical Failure load (kN)
OC-0200-****	9.0~16.9	≤40	1000	1600	16	24	65	70
OC-0300-****	9.0~16.9	40~50	1200	1800	16	24	65	70
OC-0400-****	9.0~16.9	50~60	1300	1900	16	24	65	70
OC-0500-****	9.0~16.9	60~70	1400	2000	16	24	65	70
OC-0600-****	9.0~16.9	70~80	1500	2100	16	24	65	70
OC-0700-****	9.0~16.9	80~90	1600	2200	16	24	65	70
OC-0800-****	9.0~16.9	90~100	1700	2300	16	24	65	70
OC-0900-****	9.0~16.9	100~110	1800	2400	18	24	65	100
OC-1000-****	9.0~16.9	110~120	1900	2500	18	24	65	100

Remark: “****”refers to diameter of OPGW, if stranding direction is left hand, we normally add “S” at the end of type.For example, OPGW diameter: 13.20mm, RTS=76.5kN, right hand, the type is: OC-0600-1320 ;OPGW diameter: 14.40mm, RTS=118kN, left hand, the type is: OC-1000-1440S

*L1,*L2,*M,*C,*A, please refer to related product drawings.