Products

Wedge Tension Clamp

Wedge Tension Clamps are used for fixing the terminal of the conductor and ground wire on the tension tower. It bears all or part of the tension of the conductor and ground wire.

Usage scenarios

Transmission line system, substation system, distribution system

Technical features

Due to its internal wedge-shaped structure, it can be pulled more and more tightly in the line. Thus can meet the requirement of a standard holding strength of 95% RTS of the conductor.

Product advantages

The construction is convenient without special tools and instruments, one wrench can complete the installation;
Free maintenance of bolt looseness and heating of the jumper plate. Free maintenance of the looseness of the jumper plate during long-term operation.

Technical details

Catalog No.	Suitable diameter of Conductor (mm)	Dimensions (mm)				Failure load (kN)
Catalog No.	Suitable diameter of Conductor (mm)	L1	L2	C	M	Failure load (kN)
NX-0512	9.5-12	84	180	18	16	50
NX-0514	12.1-14	84	180	18	16	50
NX-1015	13.1-15	125	300	20	18	100
NX-1017	15.1-17	125	300	20	18	100
NX-1019	17.1-19	125	300	20	18	100
NX-1221	18.1-21	155	450	20	22	120
NX-1224	21.1-24	155	450	20	22	120
NX-1627	24.1-27	155	450	24	24	160
NX-1629	26.1-29	155	450	24	24	160
NX-2130	28.1-30	195	600	24	24	210
NX-2132	30.1-32	195	600	24	24	210
NX-2135	32.1-35	195	600	24	24	210
NX-2537	35.1-37	255	580	28	27	250
NX-2539	37.1-39	255	580	28	27	250
NX-3242	39.1-42	255	580	32	30	320